Tag Archives: autocad course

The Function of “ORTHO”, “POLAR” and “Dynamic Input” in Autocad

Ortho, Polar & Dynamic Input are modes of operation. They are situated in the status bar just below the workspace. Each mode gives the workspace a certain direction of working i.e. in workspace while using cursor each mode activates certain … Continue reading

Posted in AutoCAD Training, autocad training institute in delhi, AUTOCAT TRAINING, autodesk training | Tagged , , , | Leave a comment

Mental Ray and V-Ray in 3Ds Max

In 3Ds Max there are mainly two types of lights i.e. MENTAL RAY V-RAY Mental Ray Mental ray is a default setting of light in max. In this there are standard lights and photometric lights. In Standard lights there is … Continue reading

Posted in AutoCAD Training, autocad training institute in delhi, AUTOCAT TRAINING | Tagged , , , , | Leave a comment

Difference between Line and Polyline?

The Line and Poly line are two objects with difference properties in Auto-CAD. In the line command, every time we click, the part between two points are- an Independent unity but the part between the first point and the last … Continue reading

Posted in AutoCAD Training, autocad training institute in delhi, AUTOCAT TRAINING | Tagged , , , , , | Leave a comment

Introduction of Revit Architecture, Structure, and System

Revit Architecture is a racy architectural design and documentation software application. Which is created by Autodesk. We can use Revit to create architects and building design as professionals. The tools and features of Revit Architecture is provide us simply and … Continue reading

Posted in AutoCAD Training, autocad training institute in delhi, AUTOCAT TRAINING | Tagged , , , , | Leave a comment

Chamfer and Fillet in AutoCad

Chamfer :- It is a symmetrical sloping surface at an edge or corner. It is an angled line that meets the endpoints of two straight objects or a sloped transition between two surfaces or adjacent faces- We can apply chamfer … Continue reading

Posted in AutoCAD Training, autocad training institute in delhi, AUTOCAT TRAINING | Tagged , , , , , , , | Leave a comment

Divide and Measure Command in AutoCad

Point– Points can explain as nodes which can snap objects. We can use it by applying command as P + ENTER. We can use it to specify different’s sections of the object . Example in electrical circuits where two or … Continue reading

Posted in AutoCAD Training, AUTOCAT TRAINING | Tagged , , | Leave a comment

Uses of Lenthen Command

Short Cut:-LEN+enter: This command is used to extend or trim the length of a line and an object. If we apply positive value it extend the value of object as mentioned and it work similar to extend.         Ex:- (5) … Continue reading

Posted in AutoCAD Training, autocad training institute in delhi, AUTOCAT TRAINING | Tagged , , , | Leave a comment

Panel in AutoCad

Panel is a circuit that used to control the electricy of any building or house or in industries from a single unit which we call panel once electricity is carried beyond our meter it is distributed to lights and appliances … Continue reading

Posted in AutoCAD Training, autocad training institute in delhi, AUTOCAT TRAINING | Tagged , , , | Leave a comment

LENGTHEN Command in AutoCad

This command is very useful in AutoCad. In this command we can change the length of object including angle of arc. In this command you can specify changes. LENGTHEN command can be used for trimming and extending objects. This command’s … Continue reading

Posted in AutoCAD Training, autocad training institute in delhi | Tagged , , | Leave a comment